Tag Archives: Mazda RX7

JDM, Wheels

BRS Poison by Work Wheels – JDM Wheels

1 Comment
BRS Poison by Work Wheels - JDM Wheels
The BRS Poison are JDM Wheels made by Work Wheels. The BRS Poison feature 3 piece construction, utilizing sandwich mounted faces; this leads to a very nice exposed wheel bolt design. The BRS poison were available in a nice variety of sizes between 16×7 and 17×11 and in Gunmetallic or Silver. As the ad implies, they were available in 5×114 5×112 and 5×120 PCDs. Pictured are BRS Poison mounted to a FC3S Mazda RX7.

Continue reading BRS Poison by Work Wheels – JDM Wheels →

JDM, Wheels

Rocket Bunny Mazda RX7 FD3s on Enkei 6666 Wheels

Leave a comment
Rocket Bunny tra_kyoto Mazda RX7 FD3s on Enkei 6666 Wheels
I spotted these images onthe Rocket Bunny tra_kyoto Facebook Page; images of the new Rocket Bunny kit for the Mazda RX7 FD3s and a fresh set of JDM Wheels. – Rocket Bunny Mazda RX7 on Enkei 6666 Wheels
Rocket Bunny tra_kyoto Mazda RX7 FD3s on Enkei 6666 Wheels
The Wheels on the Rocket Bunny RX7 are the 6666 Mesh Wheels a, NEW JDM Wheels made by Enkei; these have gold faces with polished lips. – Rocket Bunny Mazda RX7 on Enkei 6666 Wheels

 

Rocket Bunny tra_kyoto Mazda RX7 FD3s on Enkei 6666 Wheels
The Specs on the Enkei 6666 wheels are 17×9.5 -30 Front and 17×10.5 -60 on the rear. JDM Wheels. Rocket Bunny Mazda RX7 on Enkei 6666 Wheels

 

Rocket Bunny tra_kyoto Mazda RX7 FD3s on Enkei 6666 Wheels
The Rocket Bunny Kit really compliments the lines of the FD3S, alloiwng some really aggresive rubber. – Rocket Bunny Mazda RX7 on Enkei 6666 Wheels

 

Rocket Bunny tra_kyoto Mazda RX7 FD3s on Enkei 6666 Wheels
Its good to see aftermarket support for the RX7 after being taken off the market for such a long time! – Rocket Bunny Mazda RX7 on Enkei 6666 Wheels

 

Rocket Bunny tra_kyoto Mazda RX7 FD3s on Enkei 6666 Wheels
Rocket Bunny Mazda RX7 on Enkei 6666 Wheels

 

Continue reading Rocket Bunny Mazda RX7 FD3s on Enkei 6666 Wheels →

JDM, Old School, Wheels

Super Star Wheels Line Up – JDM Wheels

Leave a comment
Super Star Wheels Line Up - JDM Wheels
Super Star Wheels has been manufacturing JDM Wheels since the 80’s. This ad exhibits their lineup from 1982.
Super Star Wheels SS05 on a Nissan 240ZG
Super Star Wheels SS01 On a Toyota Chaser
Super Star Wheels SSRIII Mazda RX7 SA
Super Star Wheels SS06 Pontiac Trans Am
Super Star Wheels SSRFIII Mazda 323
Super Star Wheels SSRFI Honda Prelude
Super Star Wheels SS03 Nissan Cedric

 

JDM, Rare Parts, Wheels

Racing Beat RB-02 by Takechi Project – JDM Wheels

Leave a comment
Racing Beat RB-02 by Takechi Project - JDM Wheels
Racing Beat RB-02 are JDM wheels that were produced by Takechi Project, who also produce the JDM Wheels Racing Hart. More interesting is the fact that the Racing Beat RB-02 is actually manufactured by Work Wheels. Could we say Racing Beat RB-02 produced by Takechi Project Manufactured by Work Wheels? The Racing Beat RB-02 feature a 3 piece construction with a 6 spoke face featuring a faux center lock, hidden lug nut design. – Racing Beat RB-02 JDM Wheels
Racing Beat RB-02 by Takechi Project - JDM Wheels
The Racing Beat RB-02 are mainly designed for Mazda Miata 4×100, and Mazda RX7 5×114 fitments. Sizing included 15×6.0~15×7, 16×6.5~16×9.0 and 17×7.0~17×10 inch fitments. I’m sure 17×10.0 would look killer on the rear of an RX7. – Racing Beat RB-02 JDM Wheels
Racing Beat RB-02 by Takechi Project - JDM Wheels
Here is a picture of the Land Speed Record Mazda RX7 FD sporting 6 spoke wheels. Not sure if those are custom Racing Beat Wheels or otherwise. Skinny Wheels and Tires are used on Land Speed Record Cars to reduce rolling Resistance and aid in top speed attempts. – Racing Beat RB-02 JDM Wheels
Racing Beat RB-02 by Takechi Project - JDM Wheels
NA Mazda Miata on Racing Beat RB-02 in the Racing Beat Livery Colors. One interesting thing about this wheel ad is that all of the pictures are taken in the USA, as Racing Beat is an American Company. – Racing Beat RB-02 JDM Wheels

Continue reading Racing Beat RB-02 by Takechi Project – JDM Wheels →

JDM, Wheels

SSR Professor SP1 on FC Mazda RX7

Leave a comment
SSR Professor SP1 on FC Mazda RX7
Clean FC Mazda RX7 examples are hard to come by today, as this car is almost a Japanese Classic. Most examples are old and beat up, many with obscure engine swaps; but this specimen in Japan is really refreshing to see. – SSR SP1 on FC Mazda RX7
SSR Professor SP1 on FC Mazda RX7
This RX7 is dumped on a clean set of 17″ SSR Professor SP1 wheeels with some really nice sizing.  Along with minimal body mods with good taste, this FC makes for one really clean build. – SSR SP1 on FC Mazda RX7
SSR Professor SP1 on FC Mazda RX7
SSR Professor SP1 in 17×8.5 wrapped in 235/40/17 tires in the front. – SSR SP1 on FC Mazda RX7
SSR Professor SP1 on FC Mazda RX7
SSR Professor SP1 in 17×10 in the rear, the rear wheels have some serious lip! – SSR SP1 on FC Mazda RX7
SSR Professor SP1 on FC Mazda RX7
The stance on this FC Rx7 is nice, meaty tires inside the wheel wells. The vented hood and front lip all look clean. – SSR SP1 on FC Mazda RX7
SSR Professor SP1 on FC Mazda RX7
Rear is clean too, wide wheels under wide flared fenders; and a polished single exit exhaust. The Aero mirros are a nice subtle mod too. – SSR SP1 on FC Mazda RX7

Continue reading SSR Professor SP1 on FC Mazda RX7 →

JDM, Wheels

Mazda RX7 Turbo II FC on 10.5″ BBS RS

2 Comments
Mazda RX7 Turbo II FC on 10.5" BBS RS
The Mazda RX7 FC model was a pretty popular sports car in its day. With the refreshed revolutionary Wankel Rotary engine now available in turbo from the factory, a new independent rear suspension, and flared fender look it was a serious machine. – Mazda RX7 Turbo II FC on 10.5″ BBS RS
Mazda RX7 Turbo II FC on 10.5" BBS RS
This Mazda RX7 Turbo II is in pristine shape for a 25 year old spots car. Shiny Paint, straight body, fitted wheels and some nice selection of parts makes for a nice and classy build. – Mazda RX7 Turbo II FC on 10.5″ BBS RS
Mazda RX7 Turbo II FC on 10.5" BBS RS
A wide set of BBS RS wheels look awesome on this Mazda RX7. The Stance of this FC are brought down by a set of Stance GR+ coilovers. – Mazda RX7 Turbo II FC on 10.5″ BBS RS
Mazda RX7 Turbo II FC on 10.5" BBS RS
17×10.5″ BBS RS on the rear, and 17×9″ BBS RS on the front. I like the way the rear wheel/tire combo sits, tall mnd meaty. – Mazda RX7 Turbo II FC on 10.5″ BBS RS
Mazda RX7 Turbo II FC on 10.5" BBS RS
Another shot of the 17×10.5″ BBS RS wheel, Racing Beat Exhaust is a nice mod. – Mazda RX7 Turbo II FC on 10.5″ BBS RS
Mazda RX7 Turbo II FC on 10.5" BBS RS
The rear end of this 7 is perfect; wide wheel tire combo with the right amount of camber, round S5 Tail lights and the racing beat exhaust. – Mazda RX7 Turbo II FC on 10.5″ BBS RS

Continue reading Mazda RX7 Turbo II FC on 10.5″ BBS RS →

JDM, Old School, Wheels

SSR Formula Mesh on Mazda FC RX7 – Clean and Simple

1 Comment

SSR Formula Mesh on Mazda FC RX-7

With everyone trying to get the fattest lip under their fenders, this FC Mazda RX7 is refreshing to look at with it’s nomal fitting
17″ SSR Formula Mesh. This 7 looks like it can be daily driven with no problems due to its civilized fitment.

 

SSR Formula Mesh on Mazda FC RX-7

Wheels are SSR Formula Mesh measuring 17×7 +32F and 17×8+32 Rear. Ichiba Spacers bring the wheels out a bit.

 

SSR Formula Mesh on Mazda FC RX7

Exhaust gasses expelled through Racing Beat Y pipe and Mufflers.

“Powered by max coilovers. dropped 800$ on a brand new pair. good times. …
… oh i love my coils. love the adjustments on it. in back im negative 3 camber in front im negative 2….
rears are 17×8 +32 and fronts are 17×7 +32”
-Celestial_Fc on rx7club.com

 

SSR Formula Mesh on Mazda FC RX7

This pic looks to be pre spacer, still clean.

 

Dandy Tanaka RX7 on SSR Formula Mesh

The first time I saw this FC, I though about the Dandy Tanaka Salt Flat RX7 which also blue with SSR Formula Mesh

 

Nardi Classic Steering Wheel Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 Mazda FC RX7

1. Interior Sports a Nardi Classic in Leather
2. 25mm Ichiba spacers sittin flush
3. SSR Formula Mesh not mounted yet
4. Car brought down with Max Coilovers
5. Stock on Coilovers

 

Specs
Mazda RX7 FC
Wheels: SSR Formula Mesh 17×8 +32R fronts, 17×7 +32F with Ichiba v.2 spacers 25mm
Tires: 215/45/17
Exhaust: Racing Beat Y pipe and Mufflers
Suspension: Max Coilovers
Interior: Nardi Claasic Leather
Exterior: S5 Round Tail Lights

Continue reading SSR Formula Mesh on Mazda FC RX7 – Clean and Simple →